For the most accurate result, we recommend installing your rod or track before measuring. This allows you to measure the actual rod/track width and the true hanging height, which helps reduce sizing errors.

If your rod or track is already installed, measure the full rod or track length from end to end. Then measure the height from the correct hanging reference point down to the floor.

Measure your window width first, then decide how far the rod or track will extend beyond each side of the window frame. For a fuller and more balanced look, we generally recommend extending the rod about 6–15 inches on each side.

For Soft Top and Grommet styles, measure from the top of the rod down to the floor. For Pleated or Ripple Fold styles, measure from the actual hanging reference point, such as the ring eyelet, track runner, or track bottom, down to the floor.

Choose Single Panel if you want one curtain panel covering the full width. Choose Split Panels if you want two panels opening from the center. For split panels, the recommended width shown is calculated per panel.

“Per panel” means the recommended width and length for each individual curtain panel. If you choose Split Panels, order two panels using the displayed per-panel size.

1 inch Above Floor leaves a small gap for easy cleaning.

Break on Floor lets the curtain just touch the floor for a tailored look.

Slight Puddle adds extra length so the fabric softly gathers on the floor.

If the exact size is not available on the website, please contact us for help with a custom-size recommendation. Since all curtains are handcrafted, a size tolerance of approximately ±1 inch is normal.